[Working 100%] Nokia asha 202 white screen hang Solution

Just flash only mxbox

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C085F620
Using device: USB ROM  and HTI, FW ver: 00.50, SN: 0000DA67
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.84
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
 Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
 Boot mode: 0xCC
 EBL version major/minor: 10.47
 EBL version: Quantum_Bootloader_10.47_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
 Flash settings: 0/1024, size: 0x04000000
 1 Block regions:
  512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35326405120508
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35326405120508_back.RPL"
Processing file: rm834__20.52.mcusw
 Downloading item CODE:rm834__20.52.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.469 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.484 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 34.141 s
Checksum verified (0xD2A9)
Processing file: rm834__20.52.ppm_az
 Downloading item CUST:package_az.ppm_ebl_psi.fls, num block: 1, size: 3.78 MB
Erasing area 0x41DC0000-0x42188052 ...OK
Programming completed in 4.687 s
Checksum verified (0xD2FC)
Processing file: rm834__20.52.image_az_059M528
 Downloading item CUST:package_az_059M528.image.fls, num block: 1, size: 12.75 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 16.000 s
Checksum verified (0xF336)
Total time for flashing process(boot+erase+write) was 3 min 18.234 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia Asha 203 USB Phonet, PORT_ID: 353264051205081
Verifying communication to device OK.



Phone type: RM-834 (202)
SW version: V 20.52 27-09-12 RM-834 (c) Nokia            
Imei plain: 3532640512XXXX-X
Product code: 059N1M0
Language Pack:
- not available.

Imei net: 353264051xxxxx
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN