MT6516 flashing tutorial and Free flash tools 100% working

Open SN Write Tool and make sure that the correct COM port is selected and baud rate is set to 115200 bps.

• While keeping only serial cable connected to the phone, remove the battery and wait 10 seconds with the battery removed.
• Click Start and you be asked to enter IMEI1 and IMEI2. Enter the correct number in the correct fields.

After entering the correct IMEI numbers and clicking OK, you have to replace the battery and press power button on the phone. If you have flashed Android, =*gt; Meta mode will appear in the bottom left of the screen.



Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.


Update: Here's a trick if you want to flash just one part of the ROM, in this case the recovery. Without formatting flash, deselect all parts except the one you want to flash.




After that, you just have to click start and turn on the phone with USB data cable connected (in this case you don't need the USB serial cable).

Maui_META_v610320

pl2303_prolific_driver

SP_Flash_Tool_v11110

writecode_l1052_v136

usb vcom driver & Sp flash tool exe_v1.1052.03


All in One Ruseme Link Download