Thursday, June 27, 2013

How to Root Samsung Galaxy S Advance I9070 100% working

Now you can root your Samsung  Galaxy S Advance I9070 if you are using it on XXDME1 Jellybean 4.1.2, other wise you have to flash your phone with the help of this article Update Galaxy S Advance I9070 with DXAMD1 Jellybean 4.1.2 Firmware. You can check your phone version by going to setting >about phone>Firmware Version, were you can see the mentioned DXAMD1 Jellybean 4.1.2.
Now assuming that you have updated your device with DXAMD1 lets began the rooting process.
So before we proceeds, there is a list of Pre Requisites that you have to fulfill.
Make a backup of your Images, Songs, Videos, Files – Copy to internal / External SD Card,
Backup your APN and MMS Settings, contacts, messages, call log..etc and don’t use KIES or ROM manager.  
Galaxy-S-Advance-I9070

Disclaimer: We are not responsible for any mishap with your smartphone or Tablets .SO…Please follow all the steps mentioned in this article carefully otherwise there is a very clear risk of bricking your device for which we should not be held responsible.
Please keep in mind
  • This tutorial is only for Galaxy S Advance I9070. Please don’t try this on any other variants of the phone.
  • This will void your warranty.

IMPORTANT STEPS

  •  Enable the USB debugging, for that go to “Settings > Applications > Development > USB debugging” and the most important part make sure that your device is left with more than 40% of the battery to insure that  the device doesn’t get turned Off in the process of firmware update.

Now the main Part:-

  • Now connect your Galaxy S Advance I9070 and copy/paste the downloaded file in the root folder(which means in no folder).
  • Disconnect your device and turn it off.
  • Now you have to start your device in  Recovery Mode. You can do it by pressing and holding the Volume Up + Menu button and Power buttons at the same time.
  • In Recovery Mode  select “install update from external SD card”.
  • Now select “choose zip from sdcard”, you can navigate with the help of volume keys and select the Rooting zip file that you copied in the initial stage and confirm the installation process. It will start the process, it will take some time.
  • After you completed all these steps go back and select “reboot system now” from the recovery menu.
You can check that your device is  rooted or not with the help of ROOT Checker .
So that’s it You have successfully Rooted your Galaxy S Advance I9070 on DXAMD1 Jellybean 4.1.2 Firmware . Please let us know how it works in the comment section and If you are facing any problem, feel free to ask me.

No comments:

Post a Comment