How To HTC Harrier hard reset

Resetting the HTC Harrier
You can perform a soft reset or a full reset. During a soft reset, the device is restarted and
only some data in opened programs may be lost. However, a full reset turns the battery off,
returns the device to its original factory settings, and deletes all programs, files, contacts and
other information you have saved to the device. Therefore, it is extremely important to back up
data to a storage card or your computer on a regular basis in the event that a full reset has to
be performed.

To perform a soft reset:

If your HTC Harrier responds slowly, stops responding, or freezes, you can soft reset it.
A soft reset causes the HTC Harrier to restart and re-adjust memory allocation. Unsaved
data in any opened applications may be lost. Use the stylus to press and hold the Reset button,
as shown bellow.

To perform a full reset:
A full device reset clears memory, deletes all data and restores the HTC Harrier to itsdefault settings.
Programs installed at the factory remain,
erasing all data that you have created and programs you
have installed.
Press and hold the power button, and then use the stylus to
press the soft reset button at the same time. Be sure you
have backed up all your data in a SD card or on your PC
before performing a full reset.

How To HTC HD7S hard reset

Performing a HD7S factory reset using phone buttons

If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.

1. With the phone turned off, press and hold the VOLUME UP and DOWN buttons, and then briefly press the POWER button.
2. Wait for the screen to show the instructions on how to do the factory reset, and then release the VOLUME UP and DOWN buttons.
3. Follow the instructions onscreen to factory reset your phone.

Performing a HTC HD7S factory reset (hard reset)

1. On the Start screen, tap .
2. Tap Settings > about phone.
3. Tap reset your phone, and then tap yes.

How To HTC HD2 Leo hard reset

HTC HD2 Leo Soft reset

Resetting Your HTC HD2 Phone

Performing a HTC HD2 Leo soft reset

Perform a soft (normal) reset to clear all active program memory and shut down all active programs. This is useful when your phone is running slower than normal, or a program is not performing properly. If a soft reset is performed when programs are running, unsaved work is lost.

1. With your thumb or finger, open the back cover by lifting up from the left side of the cover.

2. The RESET button is located at the bottom left below the battery compartment and SIM card slot. Use a small object with an unsharp, pointed tip such as a toothpick to press the RESET button.

Your phone restarts and displays the Home screen.

3. To replace the back cover, secure the right side of the back cover first and then press down the cover into place.Performing a HTC HD2 Leo factory reset
Warning! Always turn off your device before installing/replacing the battery and SIM card.

HTC HD2 hard reset

If a normal reset does not solve a system problem, you can perform a factory reset. After a factory reset, the phone is restored to its default settings—the way it was when you first purchased it and turned it on. You will lose any programs you installed, data you entered, and settings you customized on your phone, and only Windows Mobile software and other pre-installed programs will remain.

There are two ways to do a factory reset. One way is perform a clear storage process through the phone settings. The other way is to perform a hard reset by pressing certain buttons on your phone, in cases when you are unable to start up your phone and enter the phone settings.

Warning! Your phone will be set back to factory default settings. Make sure that any additional installed programs and important data on your phone have been backed up before you perform a factory reset.

Important If Encrypt files when placed on a storage card is enabled, back up all files from the storage card before performing a factory reset (Clear Storage or hard reset) or updating the operating system. Otherwise, you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

To perform a HTC HD2 Leo hard reset with buttons

1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.

2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.

To perform a clear storage

1. On the Home screen, slide to the Settings tab and then tap Security > Factory reset.
2. Enter “1234 ” and then tap Yes.

How To HTC Desire S hard reset

Performing a HTC Desire S hard reset Desire S factory reset

You can return your phone to its original state, as it was when it left the factory. This is also called a hard reset. You might want to do this if you are giving your phone to a friend or relative and you want to remove all your data first, or if your phone has a persistent problem
that is not solved by powering off the phone and then powering it on again.
A factory reset is a drastic measure. It permanently erases all your personal data and customized settings, and also removes any programs you have installed. Make sure that you have backed up the information and files you want to keep.
If your phone hangs or freezes, we recommend that you do a “soft” reset instead of a hard/factory reset. To perform a soft reset, remove the battery, wait for a few seconds, and then re-install it. After re-installing the battery, turn on the phone.

Performing a Desire S factory reset via settings

The most convenient way to do a factory reset is via the phone settings.

1. Press HOME > MENU, then tap Settings.

1. Scroll down the screen, and then tap Privacy > Factory data reset.

1. On the Factory data reset screen, tap Reset phone, and then tap Erase everything.

Warning! Always turn off your device before installing/replacing the battery and SIM card.

Performing a factory reset using phone buttons

To hard reset HTC Desire / Bravo first power off device, or if the screen doesn't responding remove the battery.


If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.

1. With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
2. Wait for the screen with the 3 Android images to appear, and then release the VOLUME DOWN button.
3. Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
4. When asked to confirm, press VOLUME UP.

How To HTC Desire HD hard reset

Restarting or factory resetting your phone

Restarting your phone (soft reset)
If your phone is running slower than normal, an application is not performing properly, or your phone becomes unresponsive, try restarting your phone and see if that helps solve the problem.
If the display is off, press the POWER button to turn it back on.
Unlock your phone if the Lock screen is displayed.
Press and hold the POWER button, and then tap Restart.
When asked to confirm, tap Restart.
If you can’t restart the phone following the above steps, remove the battery, wait for a few seconds, reinsert the battery, and then turn the phone on.

Performing a Desire HD factory reset (hard reset)

Performing a factory reset using phone buttons

If you can’t turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select FACTORY RESET, and then press the POWER button.

If you’re passing your phone on to someone else or your phone has a persistent problem that cannot be solved, you can do a factory reset (also called a hard reset). This returns your phone to the state it was in before the first time you turned it on.
Factory reset will not erase the data and files that are on the storage card.
Factory reset is not a step to be taken lightly. It’ll permanently delete all your data and customized settings, and will remove any applications you’ve downloaded and installed. Be sure to back up any data and files you want to keep before you do a factory reset.

Performing a factory reset via settings

From the Home screen, press MENU, and then tap Settings.
Tap SD & phone storage > Factory data reset.
On the Factory data reset screen, tap Reset phone, and then tap Erase everything.